AUTOSPLITTER
The Fastorq AutoSPLITTER can cut through the largest frozen nuts in just seconds, with virtually no risk of injury or accident. It's easy. Simply slip the AutoSPLITTER head over the nut and apply hydraulic pressure. One cut frees even the most corroded nut so it can be turned. Or make two cuts, 180 degrees apart, to cleanly cut the nut away.
FASTORQ straight head nut splitters offer versatility with a large cutting range (from 11/16 inch to 6-1/8 inches); cylinders that accept usually two to three heads and adapters that cut round, square, 12-point, huck bolts and uniquely shaped nuts.
The Standard AutoSPLITTER fits most API and ANSI flanges as well as valve bonnets and BOPs. Custom-built nut splitters are also available when the need arises.
Looking to get around obstructions or cut on flat surfaces? The angle head nut splitter can't be beat. With cutting range from 11/16 inch to 3-7/8 inches, the angle head goes where straight head nut splitters cannot. Avoid frustration and invest in the versatile and innovative Angle Head AutoSPLITTER.
Some jobs just call for speed. When time matters, double your performance with FASTORQ's Double Cutting Nut Splitter™. Available in 11/16 inch to 4-1/4 inch cutting range, cutting across the flats just became faster and easier. The Double Cutting AutoSPLITTER works by eliminating the need to move the nut splitter to a second position 180 degrees from the first to break the nut from the stud! That's a serious time saving benefit.
AutoSPLITTER Double Cutting Spec Sheet
AutoSPLITTER Double Cutting Operating Manual